SC 10.1 LM MONOBLOC modulating oil burner RANGE

1. Duoblock burners with high temperature steel housing and combustion head.
2. The following fuels can be used: Light oil, viscosity 6 mm2/s at 20°C, PCI11.86 kWh/kg
3. It is suitable for steam, hot water boiler, furnaces, dryers, thermal oil generators, etc.
4. Each burner can be customized to the needs of the installation.
5. Reduction of intervention time during maintenance operations:
   Electrical components with plug-in connectors
   Full accessibility to the aeraulic circuit and combustion head
   
6. Flame control is simple and reliable thanks to the photocell.
7. A customized type of sensor is used for sequential installation of multiple generators.
8. The ease of design and the use of preheated combustion air while allowing energy savings by increasing the efficiency of the combustion economizer used by the system.
9. It has the characteristics of good performance in different combustion chambers.
10. It minimizes the specific amount of nitric oxide (NOx) gas emission by obtaining an optimal fuel air mixture thanks to the customized design of its combustion head.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. Allows operation in high back pressure combustion chambers by placing a high pressure venting system.
13. Standard protection of mechanical parts IP 54.
14. IP 65 protection on request.
15. Optional internal or external flue gas circulation to reduce NOx emissions.
16. Includes all cables and power supply for the burner management system.
17. The flame can be adjusted according to the combustion chamber.
18. The incorporation of a high pressure fan allows working in combustion chambers with high back pressures.

Compliance with the following directives:

- 73/23/EEC
- 98/37/EEC
- 90/396/EEC
- EN 676 

OPTIONS

• Continuous O2 analyzer to provide extra efficiency.
• Continuous CO analyzer for a sensitive control system.
• Variable speed drive
• IP 65 protection on request.
• Possibility to select the premixing head for low NOx.
• Internal or external recirculation of combustion gases for low emissions.
• Simultaneous combustion.
• Soundproof fan.